Powder Coating For Water Pipe Powder Coating For Water Pipe
  • Powder Coating For Water Pipe Powder Coating For Water Pipe - 0 Powder Coating For Water Pipe Powder Coating For Water Pipe - 0
  • Powder Coating For Water Pipe Powder Coating For Water Pipe - 1 Powder Coating For Water Pipe Powder Coating For Water Pipe - 1
  • Powder Coating For Water Pipe Powder Coating For Water Pipe - 2 Powder Coating For Water Pipe Powder Coating For Water Pipe - 2
  • Powder Coating For Water Pipe Powder Coating For Water Pipe - 3 Powder Coating For Water Pipe Powder Coating For Water Pipe - 3
  • Powder Coating For Water Pipe Powder Coating For Water Pipe - 4 Powder Coating For Water Pipe Powder Coating For Water Pipe - 4

Powder Coating For Water Pipe Powder Coating For Water Pipe

The MST® Powder Coating For Water Pipe Powder Coating For Water Pipe is made of special epoxy resin, special curing agent, and food-grade pigments and fillers. The MST® Powder Coating For Water Pipe Powder Coating For Water Pipe has high reactivity, strong adhesion, high crosslinking density, and excellent resistance to the film. Chemical resistance, solvent resistance, cathodic stripping resistance, excellent flexibility, impact resistance and other properties.You can rest assured to buy Powder Coating For Water Pipe Powder Coating For Water Pipe from our factory and we will offer you the best after-sale service and timely delivery.

Send Inquiry

Product Description

MST® Powder Coating For Water Pipe Powder Coating For Water Pipe

We believe that long expression partnership is often a result of top of the range, value added service, prosperous encounter and personal contact for ODM Factory China MST® Powder Coating For Water Pipe Powder Coating For Water Pipe, Together with the everlasting target of "continuous top quality improvement, customer satisfaction", we have been sure that our products high quality is stable and trustworthy and our solutions are best-selling at your home and overseas. ODM Factory China Powder Coating, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We have been ready to face the worries and make the improve to understand all the possibilities in international trade.

1. Description of Powder Coating For Water Pipe Powder Coating For Water Pipe


The MST® Powder Coating For Water Pipe Powder Coating For Water Pipe is made of special epoxy resin, special curing agent, and food-grade pigments and fillers. The Powder Coating For Water Pipe Powder Coating For Water Pipe has high reactivity, strong adhesion, high crosslinking density, and excellent resistance to the film. Chemical resistance, solvent resistance, cathodic stripping resistance, excellent flexibility, impact resistance and other properties.



2. MST® Powder Coating For Water Pipe Powder Coating For Water Pipe performance parameters 


Item

Specification

Appearance

Uniform color, no lumps

Color

Same as customer's requirement

密度(g/cm³)

1.3-1.5

Non-volatile content (%)

≥ 99.4

Magnetic content (%)

≤ 0.002


3. Performance parameters of powder coating film after curing 


No.

Item

Specification

Standard

1

Appearance

Flat, uniform color, no bubbles, no cracks and shrinkage holes, light orange peel is allowed

Visual inspection

2

Adhesion (level)

1~3

SY/T 0442-1997

3

Cathodic disbondment resistance 65℃48h(mm)

≤8

SY/T 0413-95

4

Anti-bending (40)

No cracks

SY/T 0442-1997

5

Electric strength (MV/m)

≥ 30

GB/T 1408-1989

6

Impact strength

≥ 11

S Y/T 0442-1997

7

Resistant to chemical corrosion

qualified

GB/T1763-1979

8

Abrasion resistance 1000g.1000

≤20g

GB/T 1768-1979

9

Salt spray test (1000h)

No change in coating film

GB/T1771-1991

10

Flattening test (flat rate 4/5)

No cracks in the weld

CJ/T 120-2008

12

Water quality immersion test

qualified


4. Product characteristics of MST® Powder Coating For Water Pipe Powder Coating For Water Pipe

1). It has very good adhesion to the substrate.

2). The surface of the coating film has good leveling and high gloss.

3). It has strong anti-penetration and anti-corrosion ability.

4). High surface hardness and strong coating density.

5). The coating has excellent resistance to high temperature cathodic disbondment.

6).low melting temperature, high reactivity, high solidification completion rate.

7). Good mechanical properties, strong flexibility.

8).Meet the safety evaluation standards of drinking water protective materials. 



5. Storage requirements of Powder Coating For Water Pipe Powder Coating For Water Pipe


Store in a ventilated, dry, and clean room below 25°C. Keep away from fire, heating, and direct sunlight. Stacking in the open air is strictly prohibited. Under these conditions, the powder can be stored stably for 12 months. It can be re-inspected after the storage period, if the result meets the requirements, it can still be used.


6. Contact Us




Hot Tags: Powder Coating For Water Pipe Powder Coating For Water Pipe

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.