Powder Coating for Die Casting Parts Free Sample

MST® Powder Coating for Die Casting Parts Free Sample is a solid powdery synthetic resin coating composed of solid resin, pigments, fillers and additives. Unlike ordinary solvent-based coatings and water-based coatings, the dispersion medium of Powder coating for die castin is not solvent and water, but air. It has the characteristics of no solvent pollution, 100% film formation and low energy consumption.High quality Powder Coating for Die Casting Parts Free Sample is offered by China manufacturer MST. Buy Powder Coating for Die Casting Parts Free Sample which is of high quality directly with low price.

Send Inquiry

Product Description

Powder Coating for Die Casting Parts Free Sample

The client satisfaction is our primary concentrate on. We uphold a consistent level of professionalism, top quality, credibility and service for Good Wholesale Vendors China MST® Powder Coating for Die Casting Parts Free Sample, Sincere cooperation with you, altogether will make happy tomorrow! Good Wholesale Vendors China Powder Coating for Die Casting Parts Free Sample, At present our sales network is growing continually, improving service quality to meet customer's demand. If you are interested in any solutions , you should contact us at anytime. We are looking forward to forming successful business relationships with you in near future.


1. Description of MST® Powder Coating for Die Casting Parts Free Sample

Powder Coating for Die Casting Parts Free Sample is a solid powdery synthetic resin coating composed of solid resin, pigments, fillers and additives. Unlike ordinary solvent-based coatings and water-based coatings, the dispersion medium of Powder coating for die castin is not solvent and water, but air. It has the characteristics of no solvent pollution, 100% film formation and low energy consumption.


2. Curing Conditions of MST® Powder Coating for Die Casting Parts Free Sample

Standard curing:180℃ (workpiece temperature) for 15-20min
Low temperature curing: 160℃ (workpiece temperature) for 15min
Quick curing: 200℃ (workpiece temperature) for 3min

Pre-treatment: Different pre-treatment for different substrates (phosphating treatment, sandblasting treatment, shot peening treatment)
Spraying: Corona electrostatic spraying, if special spraying method is used, please inform in advance
Theoretical coverage: 8-10 square meters/kg film thickness of 60 microns varies according to type and color
Scope of application: indoor


Performance
Testing standard
Testing results
Burnish of 60 °

GB/T9754-88
1° to 95°+
Impact test
ISO6272
GB/T1723-1993
50cm/kg
Cup drawing test
ISO1520
GB/T9753-1988
8mm
adhesion
ISO2409
GB/T 9286-1998
Grade 0
Bending test
ISO1519
GB/T 6742-1986
2mm
Pencil hardness
ASTMD3363
GB/T 6739-1996
1H-2H
Salt spray test
ISO7253
GB/T 1771-1991
>500h
Wet resistance
ISO6270
GB/T 1740-1979
>1000h
Heat resistance
110℃/24h (White)
Excellent light retention,△E≤0.3-0.5
Note: 1. The above test is completed with 0.8 mm thick rust and oil removal cold rolled steel plate under experimental conditions, and the coating thickness is about 70μm;
2. The performance index of the above coating may be slightly reduced with the decrease of luster.


3. Technical Defects in Powder Coating for Die Casting Parts Free Sample Spraying for Metal Castings

Among the metal workpieces coated with MST® Powder Coating for Die Casting Parts Free Sample, some materials such as castings (iron, aluminum), hot-rolled steel plates, galvanized, etc., have rough surfaces and have microscopic pores, which make the coating film prone to pores. The formation mechanism is that during the baking and solidification of the powder coating, the workpiece is in a closed state during melting and leveling, so that the melted and leveled coating film is arched, resulting in poor flatness of the coating film surface.



Powder coatings for heat sensitive substrates developed by Milestone Industrial Co. Ltd have been applied in many fields and are the best choice for paper, plastic, wood and furniture manufacturing.


4. MST® Powder Coating for Die Casting Parts Free Sample produced by Milestone Industrial Co. Ltd. solves this problem well. In order to achieve the best coating effect, the MST process is as follows

1) Before using Powder Coating for Die Casting Parts Free Sample, pre-treat and pre-bake the workpiece;
2) Before spraying with Powder Coating for Die Casting Parts Free Sample, use a sealant (or professional primer) for primer, and try to make the coated workpiece smooth and flat without micro-holes on the surface;
3) Surface spraying and baking are required to use Powder Coating for Die Casting Parts Free Sample.


5. The Service of MST Factory


6. Packaging and Delivery



7. Contact Information

Hot Tags: Powder Coating for Die Casting Parts Free Sample

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.